Name: Sweetwood Flooring
Address: 745 Hauteview Crescent, Orléans, ON K4A 2B9, Canada, Gatineau, QC, K4A 2B9, CA
Telephone: +16132771719
Rating: 5

Question 1

How long does a hardwood floor last?

Accepted Answer

The average solid hardwood floor can last 100+ years. Hardwood flooring is the most renewable flooring material available and can be harvested without serious impact on the environment as trees are a renewable resource.

Question 2

How do I maintain my hardwood floor?

Accepted Answer

We always recommend wet cleaning your hardwood floor with a product recommended by the manufacturer. Vacuum regularly with a soft brush attachment and sweep or use a dust mop daily. DO NOT steam mop or use multi-purpose cleaners or dust treatments that can cause film buildup and damage the finish.

Question 3

What is the importance of indoor humidity for hardwood floors?

Accepted Answer

Hardwood flooring is a hygroscopic material that constantly loses and gains moisture. To minimize movement in your wood floor, it is important to keep the indoor relative humidity between 35%-50% by using a full home humidification system. This is beneficial for both your floors and your health.

Question 4

Do I need to remove baseboards when sanding a hardwood floor?

Accepted Answer

When sanding a hardwood floor, it is best to get as close to the wall as possible. Baseboards do not need to be removed, but we recommend removing the quarter round for a cleaner finish. In some cases, baseboards may need to be raised when removing carpet and installing new hardwood flooring.

Question 5

What is the difference between Refinishing and Refreshing a hardwood floor?

Accepted Answer

Refinishing involves sanding the floor down to bare wood to achieve a flat surface, remove damage like cupping and deep scratches, and allow for a change in color. Refreshing is for floors in good condition with a dulled finish; it involves deep cleaning, scuffing the top layer of varnish, and applying a new coat of high-traffic water-based finish. Refreshing cannot be done on factory-finished flooring.